Recommendations To The Operator - Tiger 370 CNC--MR Use And Maintenance Manual

MEP S.p.A.

Recommendations to the operator

Use and maintenance manual TIGER 370 CNC-- MR
3- -2
EARTHING
The installation of the earthing system must comply with the requirements set out
in IEC STANDARD 204.
OPERATOR POSITION
The position of the operator controlling machine operations must be as shown in
the diagram below.
Always wear proper goggles or protective glasses.
Do not use the machine without the guards in position. Replace the poly-
carbonate windows , if subject to corrosion.
Do not allow hands or arms to encroach on the cutting zone while the
machine is in operation.
Do not wear oversize clothing with long sleeves, oversize gloves, brace-
lets, necklaces or any other object that may become entangled in the ma-
chine during working; long hair must be tied back and bunched.
Always disconnect the power supply to the machine before carrying out
any maintenance work whatsoever, including in the case of abnormal
operation of the machine.
Before starting cutting operations, support the material at both ends of
the machine using the support arm --- standard, or OPTIONAL acces-
sories such as the feed and discharge roller tables shown in the diagram
below.
11