Pairing Cameras - Lorex Vantage LW2231 Instruction Manual

7. Pairing Cameras

The camera and the receiver have already been paired out of the box, which
means that they are exclusively communicating with each other. If for some
reason the pairing is lost, follow these steps to pair the camera and receiver.
To pair the camera to the receiver:
1 Make sure that the camera and receiver are both powered up and all antennas are properly
attached.
2 Press and hold the PAIR button on the receiver for 5 seconds to activate pairing mode.
The pairing status LED will flash on and off slowly.
3 Press the PAIR button on the back of the camera within 30 seconds of pressing the PAIR
button on the receiver.
• If pairing is successful, live video from the camera will appear on the monitor.
IMPORTANT
Pairing Cameras
Pairing Status LED
Pair button
Pair button
9