Invacare Leo Service Manual page 39

®
Invacare - Leo
·
Remove screws (1) below operating
console.
·
Pull the operating console upwards out of
the front fixing (1).
·
Remove drive lever (1).
·
Remove potentiometer plug (2) from the
operating console.
·
Remove potentiometer (3).
·
Set the potentiometer to the middle position
(see below).
·
Reassembly takes place in the reverse
order.
·
Complete reassembly of vehicle.
·
Check all operating console displays.
·
Setting the potentiometer to the middle
position:
·
Loosen the bolts (1) on the drive lever
mounting.
·
Twist the potentiometer shaft (2) until the
same resistance (approx. 5kOhm) is
measured between the central connection
cable (3) and both outputs (4).
·
Retighten the bolts on the drive lever
mounting.
·
Check settings and repeat the adjustment if
necessary.
SERVICE MANUAL
39