Invacare Leo Service Manual page 23

®
Invacare - Leo
·
Remove motor cable plug (1) from electronic
system.
·
Remove motor cable.
·
Fold the drive to the rear onto the enclosure
and the antitipper.
·
Remove wheels (1).
(see chapter 6.3)
·
Loosen motor fixing bolts (1) on both sides
and remove.
·
Remove motor downwards out of the vehicle
frame.
·
Check rubber bearing (1) on motor
suspension. Replace damaged rubber
bearings.
·
Reassembly of the motor takes place in
reverse order
·
Secure motor cable with cable tie.
·
Complete reassembly of vehicle.
·
Check all functions (trial run).
SERVICE MANUAL
23