Call Settings - TANDBERG 3000 MXP Profile User Manual

3.5.3

Call Settings

The Call Settings specifies the quality of the call. Each call will be set up with the Call Settings if
the settings are not altered. Usually it is not necessary for the user to alter the settings.
The Call Settings are defined in Control Panel - Call Quality - Default Call Settings.
When setting up a call in the Make a Call menu:
1. Select the Call Settings
control.
2. Make desired changes to Network, Bandwidth and Restrict (56k). If this is to be the new
Call settings, select Set as Default in the menu.
3. Select the OK icon and press the OK button on the remote control.
It is possible to make the changes made to the
and OK. These settings will now be the default settings for all future manually dialed calls.
These settings are also available in the menu Control Panel - Call Quality - Default Call Settings.
field for the participant and press the OK button on the remote
Call Settings
Administrator Settings
default by selecting Set as Default
41