TANDBERG 3000 MXP Profile User Manual page 152

TANDBERG 3000 MXP
If you have no stored presets on your system, you are likely not to use presets. Therefore the
presets option is not present in the dialog box. Press arrow key to navigate in the list. Press OK
on the remote control to select the desired entry.
Press a number key while in a call, when having no MultiSite and having stored presets:
A dialog box appears offering the options:
•
Dial Extension Number -> Go to Touch Tones Mode
•
Use Presets
If you don't have MultiSite (or you have used all your MultiSite capacity), the Add Call option is
not present in the dialog box. Press arrow key to navigate in the list. Press OK on the remote
control to select the desired entry.
Press a number key while in a call, when having no MultiSite and no stored presets:
You go directly to Touch Tones Mode because no other options are available. In Touch Tones
Mode (DTMF) the user can dial extension numbers, access codes, passwords, etc.
138
-> Go to Camera Presets mode