Presets And Extension Numbers - TANDBERG 3000 MXP Profile User Manual

TANDBERG 3000 MXP
3.2.8

Presets and Extension Numbers

When pressing a number key on the remote control, while in a call, the user can decide what
shall happen. The system can be configured to act automatic or manual.
While in a call, the user presses a number key to:
•
add another call
•
dial extension numbers
•
use camera presets
Setting Number Key to Automatic:
Some users want the camera presets as the default action when pressing a number key, when in
a call. The number keys can be configured to always act like this; or to act in accordance to any
of the other available choices.
Setting Number Key to Manual:
Sometimes, when you are in a call, you need to switch between adding another call, dial
extension numbers or use camera presets. Then you would want the system to give you a choice
of what to do. If you configure the Number Key Mode to Manual you can select the preferred
action when pressing a number key.
For more information about Number Key Mode, please see Control Panel - Menu Settings –
Number Key Mode.
32