System Board Removal - Dell Latitude C400 Service Manual

System Board : Dell Latitude C400 Service Manual

System Board Removal

1 fan
2 reserve battery cable
3 connector for fan extender cable
4 hard-drive connector
5 M2 x 4-mm screw (1)
6 memory module socket
7 guide pins (2)
8 5-mm hex nuts (4)
9 7-mm hex nuts (2)
10. Remove the four 5-mm hex nuts near each end of the serial and video connectors.
11. Use a flat-blade screwdriver to remove the two 7-mm hex nuts near each end of the
docking connector.
file:///F|/Service%20Manuals/Dell/Latitude/c400/sysboard.htm (2 of 3) [2/28/2004 7:51:06 AM]