Edimax ES-5500G V2 Quick Installation Manual
Edimax ES-5500G V2 Quick Installation Manual

Edimax ES-5500G V2 Quick Installation Manual

5/8-port gigabit desktop switch

Advertisement

Quick Links

ES-5500G V2 / ES-5800G V2
Quick Installation Guide
07-2012 / v1.0
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES-5500G V2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Edimax ES-5500G V2

  • Page 1 ES-5500G V2 / ES-5800G V2 Quick Installation Guide 07-2012 / v1.0...
  • Page 2 COPYRIGHT Copyright  Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co.,...
  • Page 3 PRODUCT INTRODUCTION Model no.: ES-5500G V2: 5-Port Gigabit Desktop Switch ES-5800G V2: 8-Port Gigabit Desktop Switch Package Contents Before you start using this router, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): ...
  • Page 4 Back Panel ES-5500G V2 ES-5800G V2 1. Operating Environment This switching hub must be installed and operated within the limits of specified operating temperature 0~40°C(32~104°F) and humidity (10~90% Non-condensing). ˙Do not place objects on top of the unit. ˙Do not obstruct any vents at the sides of the unit.
  • Page 5 The UTP network cables must comply with EIA/TIA 568 specifications and Category 5 standard for data transmission. Maximum length using UTP cable, between the switch and connected devices is 100 meters (300ft). Once the network cable is connected to both ends and the attached network device is powered on, the green LNK/ACT LED should be lit.
  • Page 6 Trouble Shooting 1. Power LED is not lit Check if the power cord is properly connected to the external power adapter and the power outlet. Make sure the DC power jack is firmly plugged into the power socket of the switch. 2.
  • Page 7 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This manual is also suitable for:

Es-5800g v2

Table of Contents