Your VP-6AHD 1:6 UXGA / Audio / +1 CAT5 Distributor Installing the VP-6AHD in a Rack Using Your VP-6AHD 1:6 UXGA / Audio / +1 CAT5 Distributor Connecting the Balanced/Unbalanced Stereo Audio Output Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors...
Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
Overview Overview The Kramer VP-6AHD is a high performance distribution amplifier for computer graphics (up to and exceeding UXGA resolutions) and HD signals (high definition resolutions: 480p, 576p, 720p, 1080i and 1080p), as well as audio signals. The VP-6AHD accepts:...
We recommend that you use shielded twisted pair (STP) cable. There are different levels of STP cable available, and we advise you to use the best quality STP cable that you can afford. Our STP skew-free cable: Kramer BC-SXTP, is intended for transmitting VGA signals; our non-skew-free cable: Kramer BC-STP, is intended for digital signals.
LINE IN RJ-45 connector on a Kramer CAT 5 receiver Power Connector with Fuse AC connector enabling power supply to the unit Figure 2 and Table 2 define the underside panel switches of the VP-6AHD: Table 2: Underside Features of the VP-6AHD Feature Function...
Installing the VP-6AHD in a Rack Installing the VP-6AHD in a Rack This section describes what to do before installing in a rack and how to rack mount. Before Installing in a Rack How to Rack Mount Before installing in a rack, be sure that the environment is...
1 XGA 15-pin HD(M) +Audio jack to XGA 15-pin HD(M) +Audio jack (not supplied). The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com. Alternatively, you can connect an XGA source to the XGA INPUT 15- pin HD connector, and a separate audio source to the UNBAL.
Using Your VP-6AHD 1:6 UXGA / Audio / +1 CAT5 Distributor If necessary, slide the VS and HS switches to the right to output negative sync polarity (or leave them in the left position (Normal) to retain the sync polarity) 7.
Using Your VP-6AHD 1:6 UXGA / Audio / +1 CAT5 Distributor 6.1 Connecting the Balanced/Unbalanced Stereo Audio Output Figure 4 and Figure 5 illustrate how to wire a balanced/unbalanced stereo audio output connection: Figure 4: Connecting the Balanced Stereo Figure 5: Connecting the Unbalanced...
Technical Specifications Technical Specifications Table 4 includes the technical specifications: Table 4: Technical Specifications of the VP-6AHD INPUTS: VIDEO: 1 UXGA on a 15-pin AUDIO: 1 unbalanced stereo audio on a 3.5mm HD connector mini jack; 1 balanced stereo audio on a 5-pin terminal block...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the VP-6AHD and is the answer not in the manual?
Questions and answers