GreatCall Jitterbug Manual page 24

2. Turn the phone over. At the bottom of the
battery cover you will see an arrow.
3. Towards the top of the cover, there is a
ridge, under the speaker holes. Push down
just below this ridge and then slide down,
in the direction of the arrow. Remove the cover.
4. T o remove the battery, simply slide a fingernail in the groove at the top of the
battery, and gently pull the battery out.
The Jitterbug Rechargeable Battery must be fully charged before using
the phone for the first time. We recommend an initial charge of up to
12 hours. Failure to do so may damage your battery. If you use your
Jitterbug without charging the battery, and it is critically low, it will turn
itself off.
14 Getting Started