Vibrate Mode; Adjusting The Ringer Volume - GreatCall Jitterbug Manual

Vibrate Mode

Turn the ringer off by opening your Jitterbug and pressing the volume button
on the outside of the phone until "Vibrate" appears on the Inside Display. Your
Jitterbug will be set to vibrate to alert you of incoming calls.

Adjusting The Ringer Volume

1. Open your Jitterbug and confirm it's on.
2. Press the volume button on the upper left-hand side of the
phone. Press the top of the button to increase the volume and
the bottom of the button to decrease the volume.
The available options are:
• Max • Low
• High • Vibrate
• Medium
54 Placing And Receiving Calls
Volume Button