GreatCall Jitterbug Manual page 124

5. To create your own message use the "Up/Down"
"Customize." Press the
To use the Jitterbug Library of pre-written Text Messages, use the "Up/Down"
button to scroll to "Library." Press the
button to scroll through and find the desired message.
6. Press the button when you are done typing your message. You will automatically
go to your Phone Book. Use the "Up/Down"
Press the button when the contact to whom you wish to send the Text
Message is in the middle of your Inside Display.
If you do not have the contact in your Phone Book, use the "Up/Down"
button to scroll to the "Enter Number" option. Press the
enter the phone number using the keypad. Once you have entered the
number, simply press the
7. After you press the
Inside Display.
114 Jitterbug SimpleText
button and use the keypad to type your Text Message.
button and again, use the "Up/Down"
button to send your message.
button, you will see the words "Sending Message" on the
button and scroll to
button to scroll through your contacts.
button and