Setting The Flash Time; Setting Pauses; Switching Temporarily To Tone Dialling (Dtmf) - Gigaset C460 IP Manual

Operating the base station on the PABX

Setting the flash time

You can set the flashing time.
¢ ¢
Settings
§Menu§
¢
Features Recall
q
Select flashing time and press
.
§OK§
The current setting is marked with ‰.
a
Press and hold (idle status).

Setting pauses

Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key c
and sending the phone number.
4 I O 1 L
§Menu§
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
a
Press and hold (idle status).
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
4 I O 1 1
§Menu§
~
Enter a digit for the length of
the pause (1 = 1 sec.;
2 = 2 secs.; 3 = 3 secs.;
4 = 6 secs.) and press
a
Press and hold (idle status).
42
¢
Base Additional
.
§OK§
.
§OK§
Switching temporarily to tone
dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition: You are currently holding
an external call via the fixed network or
have already dialled an external fixed net-
work number.
Open menu.
§Menu§
Tone dialling
Select and press
Touch tone dialling is now activated for
this call only.
.
§OK§