Making Settings For Voip Telephony - Gigaset C460 IP Manual

Connecting the base station with the
fixed network and the mains power
supply
¤
Please first connect the phone jack
and then the mains adapter, as shown
below.
1
2
1 Phone jack with phone cord
2 Underside of the base station
3 Mains adapter 230 V
Please note:
u
Keep the mains adapter plugged in at
all times for operation, as the phone
does not work without mains connec-
tion.
u
If you buy a replacement phone cord
from a retailer, ensure that the phone
jack is connected correctly.
Correct phone jack assignment
3
2
1
You can now use your phone to make calls
via the fixed network and can be reached
at your fixed network number!
3
1 unused
4
2 unused
5
3 a
6
4 b
5 unused
6 unused
Connecting the base station with the
router
For Internet access you need a router or a
switch, connected to the Internet via a
modem (if necessary, this can be inte-
grated in the router).
1
2
1 Side view of the base station
2 Network plug (LAN) with network cable
3 Router (or switch) network plug
As soon as the cable connecting the
phone and router is plugged in, the paging
key lights up on the front of the base
station.
Making settings for VoIP
telephony
Precondition: You have registered with a
VoIP provider (e.g.via your PC) and set up
an account. The provider must support
the VoIP SIP standard.
The following phone settings are neces-
sary in order for you to use VoIP. You will
receive all information from your VoIP pro-
vider.
u
Your user name with the VoIP provider,
if this is required by the VoIP provider
u
Your registration name
u
Your password with the VoIP provider
u
VoIP provider general settings
The connection wizard will help you with
the settings.
First steps
3
3
9