Sony Cyber-shot DSC-RX10 Help Manual page 359

Help Guide | Charging the battery pack
Help Guide
How to Use
Digital Still Camera
DSC-RX10
Charging the battery pack
The supplied AC Adaptor is dedicated to this product. Do not connect with other electronic
devices. Doing so may cause a malfunction.
Make sure to use a genuine Sony AC Adaptor.
If the product's Charge lamp flashes while charging, remove the battery pack being charged,
and then insert the same battery pack firmly back into the product. If the Charge lamp
flashes again, this may indicate a faulty battery or that a battery pack other than the
specified type has been inserted. Check that the battery pack is the specified type.
If the battery pack is the specified type, remove the battery pack, replace it with a new or
different one and check that the newly inserted battery is charging correctly. If the newly
inserted battery is charging correctly, the previously inserted battery may be faulty.
If the Charge lamp flashes even if the AC Adaptor is connected to the product and the wall
outlet (wall socket), this indicates that charging has stopped temporarily and is on standby.
Charging stops and enters standby status automatically when the temperature is outside of
the recommended operating temperature. When the temperature returns to the appropriate
range, charging resumes and the Charge lamp lights up again. We recommend charging the
battery pack in an ambient temperature of between 10°C to 30°C (50°F to 86°F).
Even if the supplied AC Adaptor is used with the product when you shoot or play back
images, power is not supplied from the wall outlet (wall socket). If you use the AC Adaptor
AC-PW20 (sold separately), you will be able to shoot or play back images while power is
supplied from the wall outlet (wall socket).
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226734.html[24/11/2013 16:12:16]
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation