Sony Cyber-shot DSC-RX10 Help Manual page 112
Hide thumbs
Also See for Cyber-shot DSC-RX10:
- Instruction manual (580 pages) ,
- Help manual (436 pages) ,
- Service manual (28 pages)
Table of Contents
Advertisement
Help Guide | Using the "Quick Navi"
Help Guide
How to Use
Digital Still Camera
DSC-RX10
Using the "Quick Navi"
You can change the settings directly using the Quick Navi screen when using the viewfinder.
1. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen is
set to [For viewfinder].
2. Press Fn (Function) button to switch the screen to Quick Navi screen.
3. Select the desired function by pressing the up/down/left/right side of the control wheel.
4. Turn the control wheel to select the desired setting.
Performing settings on the dedicated screen
Select the desired function in step 3, then press
dedicated setting screen for the function appears. Follow the operating guides (A) to perform
the settings.
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000222127.html[24/11/2013 15:56:41]
on the center of the control wheel. The
Advertisement
Table of Contents
