Sony Cyber-shot DSC-RX10 Help Manual page 327

Help Guide | WPS Push
Help Guide
How to Use
Digital Still Camera
DSC-RX10
WPS Push
If your access point has the WPS button, you can register the access point to this product
easily by pushing the WPS button.
1. MENU → (Wireless) → [WPS Push].
2. Press the WPS button on the access point you want to register.
Note
[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and
your access point supports the WPS button method. If the security setting is set to WEP or
your access point does not support the WPS button method, perform [Access Point Set.].
For details about the available functions and settings of your access point, see the access
point operating instructions or contact the administrator of the access point.
A connection may not be enabled depending on the surrounding conditions, such as the type
of wall material or if there is an obstruction or poor wireless signal between the product and
access point. If that happens, change the location of the product or move the product closer
to the access point.
Related Topic
Access Point Set.
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226701.html[24/11/2013 16:10:27]
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation