Sony Cyber-shot DSC-RX10 Help Manual page 206
Hide thumbs
Also See for Cyber-shot DSC-RX10:
- Instruction manual (580 pages) ,
- Help manual (436 pages) ,
- Service manual (28 pages)
Table of Contents
Advertisement
Help Guide | Multi Frame NR
Help Guide
How to Use
Digital Still Camera
DSC-RX10
Multi Frame NR
The product automatically shoots multiple images continuously, combines them, reduces the
noise, and records them as one image. With multi frame noise reduction, you can select larger
ISO numbers than the maximum ISO sensitivity. The image recorded is one combined image.
1. MENU →
2. Press the right side of the control wheel to display the setting screen, then select a desired
value using the top/bottom side of the control wheel.
Note
When [
Quality] is set to [RAW] or [RAW & JPEG], this function cannot be used.
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting.
Select [ISO AUTO] and press the right side of the control wheel, and set the desired values
for [ISO AUTO Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and
[ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi
Frame NR].
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226588.html[24/11/2013 16:02:14]
(Camera Settings) → [ISO] → [Multi Frame NR].
Copyright 2013 Sony Corporation
Notes on use
4-477-079-12(1)
Advertisement
Table of Contents
