Notes On The Flash - Sony Cyber-shot DSC-RX10 Help Manual

Help Guide | Precautions
The monitor is manufactured using extremely high-precision technology so over 99.99 % of
the pixels are operational for effective use. However, there may be some tiny black points
and/or bright points (white, red, blue or green in color) that constantly appear on the
monitor. These points are normal in the manufacturing process and do not affect the images
in any way.
Exposing the monitor or lens to direct sunlight for long periods may cause a malfunction.
Exercise caution when placing the product near a window or outdoors.
Do not press against the monitor. The monitor may be discolored and that may cause a
malfunction.
Images may trail across on the monitor in a cold location. This is not a malfunction.
If the monitor has drops of water or other liquids on it, wipe it with a soft cloth. If the
monitor stays wet, the surface of the monitor may change or deteriorate. This may cause a
malfunction.
When the battery pack is discharged, the product may shut off while the lens is still
extended. Insert a charged battery pack, then turn the product on again.
Make sure not to bump the lens or subject it to force.

Notes on the flash

Do not cover the flash with your fingers.
Do not carry the product by the flash unit, or use excessive strength on it.
If water, dust or sand get into the open flash unit, it may cause a malfunction.
Notes on discarding or transferring this product to others
Perform [Setting Reset] to reset all the settings.
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226731.html[24/11/2013 16:12:02]
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation