Opening/Closing The Side Panel - Sony HDC-900 Installation And Maintenance Manual

1-4. Opening/Closing the Side Panel

1-4. Opening/Closing the Side Panel
HDC-900/910
1. Unscrew the two lock screws of the side panel.
2. While sliding the safety lock toward the lens, open the
side panel by holding the handle.
3. Close the side panel and tighten securely the lock
screws of the side panel.
[Reference] [Reference] [Reference] [Reference] [Reference]
Closing the side panel brings the safety lock to an
automatic locking.
HDC-950/930
1. Unscrew the eight screws as shown in the figure, then
remove the inside panel and outside panel.
2. Reinstall in the reverse order of removal step 1.
Outside panel
Screws
1-18 (E)
Safety lock
Handle
Lock screw of the
side panel
Screws
Inside panel
HDC-900/950 IMM