Sony HDC-900 Installation And Maintenance Manual page 67

VTR 26PIN page
<VTR 26PIN>
CABLE COMP: OFF
VIDEO SEL : MAIN(RGB)
MAIN VIDEO ADJUST
G : 0
B : 0
R : 0
Y : 0
Pb : 0
Pr : 0
Item Setting
CABLE COMP OFF, 25 m, 50 m
VIDEO SEL MAIN (RGB),
MAIN (YPbPr),
RET (YPbPr)
G _30 to 30
B _30 to 30
_30 to 30
R
_30 to 30
Y
Pb _30 to 30
Pr _30 to 30
a) This setting is valid only when the camera control unit is connected.
BATT ALARM page
<BATT ALARM>
DC IN
TYPE : AC ADP
BEFORE END : --
END : --
Item Setting
a)
DC IN TYPE LITHIUM, DIGITAL,
OTHERS1
AC ADP
BEFORE END 11.0 to 17.0 V
END 11.0 to 17.0 V
a) Setting change of this item is disabled in HDC-900/910.
b) These can be selected when using batteries other than LITHIUM, DIGITA L, AC ADP and the power supply.
c) This can be selected when using an AC/DC power supply of AC-550 and so on.
HDC-900/950 IMM
(Display is initial values.)
Description
Selects the VTR (26P) cable compensation
Selects the video signal to be output to the VTR (26 p) OUT connector.
RET (YPbPr) outputs the return video signal input from the camera
a) control unit.
Corrects the output level to the VTR (26 P) OUT connector
Corrects the output level to the VTR (26 P) OUT connector
Corrects the output level to the VTR (26 P) OUT connector
Corrects the output level to the VTR (26 P) OUT connector
Corrects the output level to the VTR (26 P) OUT connector
Corrects the output level to the VTR (26 P) OUT connector
(Display is initial values.)
Description
Selects the power running in the DC IN connector.
b) , OTHERS2 b) , By this setting, the battery alarm voltage indication in accordance with
c)
the features of the battery or the power supply becomes possible.
Sets the alarm voltage indicating that the DC power is wearing out.
When the AC ADP is selected, this setting is unavailable "- - -" is
displayed showing invalid.
Sets the alarm voltage indicating that the DC power has worn out.
When the AC ADP is selected, this setting is unavailable "- - -" is
displayed showing invalid.
3-5. MAINTENANCE Menu
3-23 (E)