Locations And Functions Of Parts; Side Panel - Sony HDC-X300 Operation Manual

Locations and Functions of Parts

Side Panel

aND filter select knob
iTally unit
a ND filter select knob
Select the desired ND filter.
1: Clear
2: 1/4 ND
3: 1/16 ND
4: 1/64 ND
b Tally lamp
It is located on the top of the tally unit. When the CALL
button on the remote control connected to the REMOTE
connector is pressed, it lights with the TALLY switch set to
ON. Attach the supplied number plate to the front.
14
Locations and Functions of Parts
bTally lamp
cTALLY switch
FILTER
1 CLEAR 3 1/16ND
2 1/4ND 4 1/64ND
jTripod mount holes (bottom)
dMENU button and indicator
eENTER button
fUP/WHITE button and indicator
gDOWN/BLACK button and indicator
hDIP switches
MENU ENTER UP/WHITE DOWN/BLACK
HD
Power HAD
HIGH DEFINITION VIDEO CAMERA
The figure shows the HDC-X300/
X300K camera head.
c TALLY switch
This switch is located on the back of the top of the tally
unit. Set the switch to the right (ON) to make the lamp light
when tally signal input is supplied.
d MENU button and indicator
Pressing the button sets the camera to Menu mode and
lights the indicator.
When you press the button again, Menu mode is released
and the camera returns to its normal Shooting mode.
In Menu mode, the menu display is sent to all video
outputs from the camera.
For details on menu operations, see "Menu Operations"
on page 26.