Sony HDC-900 Installation And Maintenance Manual page 77

BOARD STATUS page
<BOARD STATUS>
ROM:V1.00
OHB :OK SG
VA :OK AT
DPR :OK AU
VDA :OK RE
DAD :OK PS
SDI :OK
DAP :OK
Item Setting
ROM
OHB OK, NG
VA OK, NG
DPR OK, NG
VDA OK, NG
DAD OK, NG
SDI OK, NG
DAP OK, NG
SG OK, NG
AT OK, NG
AU OK, NG
RE OK, NG
PS a) OK, NG
a) This setting is valid only when the camera control unit is connected, yet in the camera is used alone, setting is disabled. ("—" is
displayed.)
b) When HKC-T950 is connected, it judges based on status of the connection cable, communication state between the CCD block
adaptor and cable adaptor and so on in addition to the diagnosis in the camera that is being used alone.
n
When "NG" is indicated, contact your local Sony Sales Office.
HDC-900/950 IMM
:OK
:OK
:OK
:OK
:OK
Description
Indicates the ROM version for IC1/AT-130 board
Displays the self-diagnosis status of the CCD block.
Displays the self-diagnosis status of the VA board.
Displays the self-diagnosis status of the DPR board.
Displays the self-diagnosis status of the VDA board.
Displays the self-diagnosis status of the DAD board.
Displays the self-diagnosis status of the SDI board.
Displays the self-diagnosis status of the DAP board.
Displays the self-diagnosis status of the SG board.
Displays the self-diagnosis status of the AT board.
Displays the self-diagnosis status of the AU board.
Displays the self-diagnosis status of the RE board.
Displays the self-diagnosis status of the PS board.
3-7. DIAGNOSIS Menu
b)
3-33 (E)