Sony HDC-900 Installation And Maintenance Manual page 35

1-10. Disconnecting/Reconnecting Flexible Card Wire
m
. Be sure to turn off the power when disconnecting and connecting the flexible card wire. To power off,
be sure to disconnect the cable connected to the DC IN connector or the battery, in addition to turning
off the power switch.
. The holded flexible card wire remarkably shortens the life span. Pay careful attention when handling it.
Disconnecting
m
. Do not pull the flexible card wire before unlocking.
. There are a conductive portion (printed side) and insulation portion (white belt) in the flexible card
wire. Confirm the direction of the flexible card wire before connecting it.
1. Unlock by shifting portion A of the connector in the direction indicated by the arrow, then pull out
the flexible card wire.
Reconnecting
m
. Ensure that no stain or dust adheres on the conductive surface of the flexible card wire.
. Ensure that the connector is unlocked.
1. Insert the flexible card wire firmly as far as it will go.
2. Press in the portion A of the connector in the direction indicated by the arrow to lock the connector.
At that time, take care that the flexible card wire is not inclined.
HDC-900/950 IMM
Flexible card wire
A
Connector
Flexible card wire
A
Connector
1-10. Disconnecting/Reconnecting Flexible Card Wire
A
Insulation portion
A
1-27 (E)