Record Mode - Uniden iGO CAM 850 Owner's Manual

Record Mode

To record a video, ensure that a valid micro SD card is inserted
in the given slot.
NOTE
Using the iGO CAM 850 you can record videos and take photos. To record
videos, you need to ensure that the unit is in the Record mode.
Press MODE to switch between Record, Photo and Playback modes.
Press the UP button to switch from Loop Recording to Auto Detect (Motion
Detection).
Recording
The unit always records from 2 cameras (dual recording mode), irrespective
of the view displayed on the LCD. That means to say, if only footage from
CAM B is displayed on the LCD, the unit still records from CAM A and CAM
B.To record from CAM A and CAM B ensure that the B/R switch (bottom
of the unit) is at B. To record from CAM A and Reverse Camera, insert the
Reverse camera plug into AV IN port and ensure that the B/R switch is at R.
The camera resolution is as shown below. Note: The Reverse camera can
record only with CAM A.
Resolution
Resolution
When connected to a car charger, the unit automatically starts recording, the
icon will start flashing on the screen. To stop recording, press OK and
icon will stop flashing indicating that the recording has stopped.
When the recording has been set to Auto Detect mode, the
display on the LCD.
UNIDEN iGO CAM 850
CAM A
720P
VGA
CAM A
1080P
720P
VGA
10
CAM B
720P
VGA
Reverse Camera
VGA
icon will
Vehicle Recorder