Uniden iGO CAM 850 Owner's Manual page 11

Protect the Current Recording
While recording, if you want to protect the current recordings, then press
MODE, the
icon will appear on the screen. This indicates that those
recordings have been locked and will not be overwritten by new video clips.
GPS Antenna
To geotag your videos, insert the GPS plug into the GPS port and place the To geotag your videos, insert the GPS plug into the GPS port and place the
GPS Antenna on the windscreen. The GPS Antenna on the windscreen. The
the iGO CAM Player on your PC (refer to page 14) and view the recordings
and trace them on the map.
Reverse Camera
Reverse Camera helps you capture lower reverse footage. Insert the Reverse
camera plug into the AV IN port and slide the B/R switch, at the bottom of the
unit, from B to R. The
Reverse camera should now be visible on the screen.
Menu Settings
Please note, you cannot access MENU in the record mode,
when the unit is recording. To access the Menu settings, you will
need to stop recording by pressing OK.
NOTE
Press MENU to open the Menu Settings. Press MENU again to toggle
between the various settings and display the options under them. The UP/
DOWN keys can be used to scan through the options, under each menu
setting. Press OK to select the required option.
Press MENU to exit the Menu Settings.
MP (Record Resolution)
Use this setting to determine the video resolution. Choose between VGA,
720P and 1080P. However, when recording with two cameras you can
choose only between VGA or 720P.
RT (Video Clip Record Time)
Recordings are stored as video clips, which can be played back as a
continuous recording or as individual clips. Use this option to set the length of
each video clip. If you choose the option 'Off' then the recorder will not loop
record and the fi les will not be overwritten on the micro SD card.
UNIDEN iGO CAM 850
icon displays on the screen. Install icon displays on the screen. Install
icon appears on the screen. The footage from the
11
Vehicle Recorder