Scanning For Cable Tv Channels - Tiviar Alpha Plus User Manual

3.5 Scanning for Cable TV Channels

Open the Settings
There are two signal bars on the lower part of the screen. The signal level bar
indicates how strong the signal is, and the signal quality bar indicates how easy
it is to pick up.
To scan for all available channels, set
and determine which type of channels to scan for.
• All Service: Scan for all available TV and radio channels.
• FTA Only: Scan only for free TV and radio channels.
• TV Only: Scan only for free and pay TV channels.
To scan for a specific channel, set
the channel.
• Frequency: Specify the channel's frequency.
• Symbol rate: Specify the channels' symbol rate.
• QAM Mode: Specify the modulation method used for the channel.
Select Start Search
28
> Installation > Cable Search
Search Mode
Search Mode
to start channel scan.
menu.
to Auto. Choose
to Manual. Set these options for
S  C
Search Type