A Universal Remote Control - Tiviar Alpha Plus User Manual

Appendix
Universal Remote Control
The remote control can expand its capabilities, allowing users to control a TV
connected to the receiver.
A user can transform the remote control into a universal remote control by en-
tering a 4-digit code for the TV.
1. Find the TV's brand name from the list of TV codes.
2. Press and hold the
button is pressed.
3. Enter one of the available TV codes. If the TV code matches one that the
remote control has, the
the TV code is set to be used. Otherwise, the
4. Press the TV button to see if the TV code works. If the TV gives no response,
repeat these steps to try another TV code.
If all of the codes appear not to work, follow these steps:
1. Press and hold the
2. To find a right TV code, repeat pressing the up or down navigation button
until the TV responds. Pressing and holding either of theses buttons allows
up to eight consecutive attempts.
3. When the TV turns on or off, press the
A
TV button for 3 seconds, and it keeps blinking until any
TV button blinks three times, which indicates that
TV button for 3 seconds.
TV button becomes off.
OK button to set the found code to
63