Scanning Cable Tv Channels - Tiviar Alpha Plus User Manual

• TV Only: Scan only for free and pay TV channels.
To scan for a specific channel, set it to Manual, and then choose
and specify the channel's number.
If the aerial needs power supply, turn on
Select Service Search

3.6 Scanning Cable TV Channels

Open the Settings
There are two signal bars on the lower part of the screen. The signal level bar
indicates how strong the signal is, and the signal quality bar indicates how
easy it is to pick up.
To scan for all available channels, set
Type and determine which types of channels to scan for.
• All Service: Scan for all available TV and radio channels.
• FTA Only: Scan only for free TV and radio channels.
• TV Only: Scan only for free and pay TV channels.
To scan for a specific channel, set
for the channel.
• Frequency: Specify the channel's frequency.
• Symbol rate: Specify the channels' symbol rate.
• QAM Mode: Specify the modulation method used for the channel.
Select Service Search
S C
to start channel scan.
> Installation > Cable Search
Search Mode
to start channel scan.
Antenna 5V.
menu.
Search Mode to Auto. Choose
to Manual. Set these options
Channel
Search
23