To watch Conax-scrambled pay channels, insert a Conax pay-TV card into the
card slot. To watch non-Conax channels, insert a pay-TV card into a CA module,
and then insert the CA module into the CAM slot.
To view the information about the pay-TV card, open the
Settings
>
Utilities
>
CAS
menu. Select the slot in which the pay-TV card or CA module is installed.
4.8 Watching Subchannels
Particular channels, such as sports channels or film channels, may have subchan-
nels (multi-feed). For example, a film channel may use subchannels to air a single
film with regular minutes-long intervals at the same time.
The subchannel symbol
highlighted on the programme information dialog
box indicates that the current channel has multiple subchannels. Press the blue
button, and a list appears showing available independent programmes. Select
a programme to watch it.
4.9 Setting Up Timers
Wake-Up Timer
This receiver can be set to turn on at a specific time and tune in to a specific
channel. Open the
Settings
>
Configuration
>
Time Setting
menu. Determine
how frequently to run the wake-up timer by setting
Wake Up Mode
to anything
other than Off. According to this setting, specify the date, days of the week, time,
and channel.
Sleep Timer
This receiver can be set to turn off at a specific time. Open the
Settings
>
Config-
uration
>
Time Setting
menu. Determine how frequently to run the sleep timer
by setting
Sleep Mode
to anything other than Off. According to this setting,
specify the date, days of the week, and time.
W TV
35