Getting Started - Tiviar Alpha Plus User Manual

Watching Two Channels Simultaneously

1.4 Getting Started

Install the digital TV receiver properly, referring to
Plug the power adapter into a power outlet, and insert the connector into the
power socket on the rear of the receiver. Then press the power button
remote control to turn on the receiver.
When turning on the receiver for the first time, the initial setup process automat-
ically starts. Follow the on-screen instructions to finish the process. At each step,
either make a choice or skip the step.
1. Choose a language for the user interface.
2. Configure the network settings. See
Network Settings
3. Install add-ons to internet-based apps, such as Free TV+ and iRadio+, when
an internet connection is available. Additionally, determine whether to re-
store the receiver using the stored settings and channels, if there is any
backup data.
4. Set the clock. See
5. Scan for TV channels. See
I
on page 57.
Clock Settings on page 58.
Scanning for Channels
on page 33.
Installation
Network Connection
on page 21.
on page 14.
on the
on page 19 and
11