Arris Touchstone DG950 User Manual page 19

Getting
Safety Started
Step 1
Step 3
Ethernet
Installation Configuration
Mounting the Data Gateway
You can either mount the Data Gateway on a wall or place it on a desktop. For
wall-mount applications, you can mount the Data Gateway with the indicators
facing upward (vertical) or to the side (horizontal).
Tools and Materials
For wall-mounted installations, make sure you have the following tools and mate-
Step 2
rials before proceeding:
• for mounting on drywall: Two 1/4" (6mm) drywall anchors and a drill with
1/4" (6mm) bit (not included)
• for mounting on plywood or studs: two #6 x 1.5" (38.1 mm) self tapping
screws (not included)
• screwdriver (flat-blade or Phillips, depending on what kind of screws you
use)
• wall-mount template (included)
Step 4
• transparent tape: for temporarily securing the mounting template to the wall
(not included)
Location
Always position the Data Gateway:
• within reach of an AC outlet. The power cord must reach the outlet without
stretching and without adding extension cords.
• near a cable outlet (to avoid long cable runs).
Touchstone DG950 Data Gateway User's Guide
Usage Troubleshooting Glossary
19