System Requirements - Arris Touchstone DG950 User Manual

Getting
Safety Started
Ethernet
Installation Configuration

System Requirements

The Touchstone Data Gateway operates with most computers. The following de-
scribes requirements for each operating system; see the documentation for your
system for details on enabling and configuring networking.
To use the Data Gateway, you need DOCSIS or Euro-DOCSIS high-speed Internet
service from your cable company.
Recommended Hardware
The following hardware configuration is recommended. Computers not meeting this
configuration can still work with the DG950, but may not be able to make maximum
use of DG950 throughput.
• CPU: P4, 3GHz or faster
• RAM: 1GB or greater
• Hard drive: 7200 RPM or faster
• Ethernet: Gig-E (1000BaseT)
Note: CAT5e Ehternet cable is required for gigabit Ethernet (Gig-E), not reg-
ular CAT5 cable.
Windows
Windows XP, Windows Vista, or Windows 7. A supported Ethernet or wireless LAN
connection must be available.
MacOS
MacOS X. A supported Ethernet or wireless LAN connection must be available.
Linux/other Unix
Hardware drivers, TCP/IP, and DHCP must be enabled in the kernel. A supported
Ethernet or wireless LAN connection must be available.
Touchstone DG950 Data Gateway User's Guide
Usage Troubleshooting Glossary
11