Jet 22-44 Pro-3 Specification Sheet

JET 22-44 Pro-3 Drum Sander
Our JET 22-44 Pro-3 Drum Sander quickly became a
favorite of wood workers because of its durability, huge
capacity, ease of use and exceptional surface smoothing
capabilities. In addition to the wide range of sanding grits,
our variable feed rate and exclusive SandSmart™
technology provide unrivaled control over the sanding
process.
The JET 22-44 Pro-3 Drum Sander has the capacity to
handle surprisingly large jobs despite its 52"-tall by 41"-
long dimensions. The JET 22-44 Pro-3 Drum Sander can
sand material up to 4"-thick and 44"-wide (2 passes). The
design of the drum and conveyor also mean that it can handle material as short as 2 ¼"-
long and down to 1/32"-thick! And, we are so sure of the heavy-duty construction and
Built around massive steel
columns, the JET 22-44
Pro-3 is as tough as it is
accurate.
caster has a foot operated lever that locks the swivel and wheel.
A full-width hinged shroud around the drum improves safety
while enhancing dust collection. A 4"-diameter port on the
outfeed side of the shroud lets you connect standard dust
collector hose (no adapters needed) to keep the shop clean and
extend the life of the abrasive.
design that we cover the JET 22-44 Pro-3 Drum Sander with our
5-year warranty!
Tough Structure
The JET 22-44 Pro-3 Drum Sander is built around a rigid
backbone. Massive 3"-diameter, thick walled steel posts provide
the main vertical support for this 385 lb. machine. A specially
engineered cast iron arm supports the drum assembly, insuring
accurate, repeatable sanding. The table and motor are also rigidly
supported on heavy gauge steel brackets.
The wide stance cast aluminum legs keep the JET 22-44 Pro-3
Drum Sander exceptionally stable during use. The high quality
casters at the end of each leg feature
smooth rolling, non-marring
polyurethane tires. Each full swivel
The JET 22-44 Pro-3 Drum Sander
has the power and versatility to make
your shop more efficient.
Even the high end, full swivel
locking casters with their
polyurethane tires are standard
equipment.