Table of Contents
Advertisement
© FLIR Commercial Systems, 2011. All rights reserved worldwide. No parts of this manual, in whole or in
part, may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable
form without the prior written permission of FLIR Commercial Systems
Names and m a r k s appearing on the p r o d u c t s herein are either registered trademarks or trademarks of
FLIR Commercial Systems and/or its subsidiaries. All other trademarks, trade names, or company names
referenced herein are used for identification only and a r e the property of their respective owners.
Liberation fonts are copyright 2009 by RedHat and a r e used under authority of the GN U public license.
Information about these fonts and t h e G N U public license can b e found at:
https://www.redhat.com/promo/fonts/.
This product is protected by patents, design patents, patents pending, or design patents pending.
If you have q u e s t i o n s that are not covered in this ma n u a l , or need service, contact FLIR Commercial Systems
Customer Support at 805.964.9797 for additional information prior t o returning a camera.
This documentation is subject to change without notice.
This equipment must be disposed of as electronic waste.
Contact your nearest FLIR Commercial Systems, Inc. representative for instructions on how to
return the p r o d u c t to FLIR for proper disposal.
FCC Notice. This device is a subassembly designed for incorporation into other products in order to provide an infrared camera
function. It is not an end-product fit for consumer use. When incorporated into a host device, the end-product will generate, use,
and radiate radio frequency energy that may cause radio interference. As such, the end-product incorporating this subassembly
must be tested and approved under the rules of the Federal Communications Commission (FCC) before the end-product may be
offered for sale or lease, advertised, imported, sold, or leased in the United States. The FCC regulations are designed to provide
reasonable protection against interference to radio communications. See 47 C.F.R. §§ 2.803 and 15.1 et seq.
Industry Canada Notice. This device is a subassembly designed for incorporation into other products in order to provide an
infrared camera function. It is not an end-product fit for consumer use. When incorporated into a host device, the end-product
will generate, use, and radiate radio frequency energy that may cause radio interference. As such, the end-product incorporating
this subassembly must be tested for compliance with the Interference-Causing Equipment Standard, Digital Apparatus, ICES-
003, of Industry Canada before the product incorporating this device may be: manufactured or offered for sale or lease, imported,
distributed, sold, or leased in Canada.
Avis d'Industrie Canada. Cet appareil est un sous-ensemble conçu pour être intégré à un autre produit afin de fournir une
fonction de caméra infrarouge. Ce n'est pas un produit final destiné aux consommateurs. Une fois intégré à un dispositif hôte, le
produit final va générer, utiliser et émettre de l'énergie radiofréquence qui pourrait provoquer de l'interférence radio. En tant que
tel, le produit final intégrant ce sous-ensemble doit être testé pour en vérifier la conformité avec la Norme sur le matériel
brouilleur pour les appareils numériques (NMB-003) d'Industrie Canada avant que le produit intégrant ce dispositif puisse être
fabriqué, mis en vente ou en location, importé, distribué, vendu ou loué au Canada.
EU Notice. This device is a subassembly or component intended only for product evaluation, development or incorporation into
other products in order to provide an infrared camera function. It is not a finished end-product fit for general consumer use.
Persons handling this device must have appropriate electronics training and observe good engineering practice standards. As
such, this product does not fall within the scope of the European Union (EU) directives regarding electromagnetic compatibility
(EMC). Any end-product intended for general consumer use that incorporates this device must be tested in accordance and
comply with all applicable EU EMC and other relevant directives.
102_PS242-01 Rev100
October 2011
Tau Quick Start Guide
Page 10 of 10
Advertisement
Table of Contents
