Photocapture Center™ Print Settings; Print Quality; Paper Options - Brother MFC-J5910DW Advanced User's Manual

Chapter 8
PhotoCapture Center™
print settings
You can change the print settings temporarily
for the next print job.
The machine returns to its default settings
after being idle for 3 minutes, or if the Mode
Timer returns the machine to Fax mode.
(Mode Timer uu page 3)
Note
You can save the print settings you use
most often by setting them as the default.
(Setting your changes as a new default
uu page 50)

Print Quality

a
Press (PHOTO).
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
Press Print All.

b
Press Options.
c
Press s or t to display
Print Quality.
d
Press Print Quality.
e
Press Normal or Photo.
f
If you do not want to change additional
settings, press
Press Start to print.
46
8
8
.

Paper options

Paper Type
a
Press (PHOTO).
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b
Press Options.
c
Press s or t to display Paper Type.
d
Press Paper Type.
e
Press s or t to display Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61 or Other Glossy.
Press the option you want to set.
f
If you do not want to change additional
settings, press
Press Start to print.
Paper and print size
a
Press (PHOTO).
Do one of the following:
Press View Photos and press

s or t to display each photo. When
the photo you want to print is
displayed, press OK.
Press Print All.

b
Press Options.
c
Press s or t to display Paper Size.
8
8
.
8