Installing The Speaker Cover And Keyboard - Toshiba Satellite M45 Maintenance Manual

4 Replacement Procedures

Installing the Speaker Cover and Keyboard

Install the speaker cover and keyboard according to the following procedures and Figure 4-
21, 4-22.
1. Connect the keyboard cable on main board connector CN8 and put it on correct
position.
2. Securing the keyboard with two M2.5x2.6 black bind screws.
3. Please the speaker cover in the correct position and fasten the following 8 latches, in
that order:
- Two bottom latches
- One latch on the left and right sides
- Four front latches
4. Close the display and turn the computer over.
4-34
Figure 4-22 Removing the keyboard
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
4.6 Speaker cover and Keyboard