Toshiba Satellite M45 Maintenance Manual page 140

3 Diagnostic Programs
20xx IDE-HDD
01 Get Parameter Fail !
02 Write Pattern Error
03 Data Compare Error
04 Read Verify Error
05 Seek Error
Disk Controller Self Test
06
Failed
Disk Controller Test
07 unexpected interrupt
Failed
Disk Controller action
09
Test Failed
Disk dos not support
10
SMART
Disk read attribute
11
threshold error
Disk read attribute value
12
error
Disk SMART attribute
13
value error
21xx ODD
No Disk in CDROM
01
The Disk in CDROM is
02
not Data Disk
IDE-CD Controller Error Functional errors with the CD-
03
CD Read Error
04
CD Seek Error
07
Eject Error
09
66 Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual
controller
Wrong test parameters are input
by user.
HD is damaged.
HD is damaged.
HD is damaged.
HD is damaged.
The HD controller is damaged.
The HD controller is damaged.
The HD controller is damaged.
Disk dos not support SMART
Disk read attribute threshold
error
Disk read attribute value error
Disk SMART attribute value
error
No disk is found in the CD-
ROM.
The disk in the CD-ROM is not
Data Disk.
ROM.
Either the disk or the CD-ROM
is damaged.
Either the disk or the CD-ROM
is damaged.
Wrong CD-ROM drive.
3.11Error Codes and Description
Reinput the correct parameters.
Send the HD for repair.
As above.
As above.
As above.
As above.
As above.
As above.
Change HD which supported
SMART and test again
Send the HD for repair.
As above.
As above.
Insert a disk into the CD-ROM.
Insert a DATA CD.
Send the CD-ROM for repair.
Replace the disk or send the CD-
ROM for repair.
Replace the disk or send the CD-
ROM for repair.
Exit from the wrong drive.