Disassembling The Odd Drive; Assembling The Odd Drive - Toshiba Satellite M45 Maintenance Manual

4.8 ODD bay Module

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or
replace the ODD drive only if it failed.
Disassemble the ODD drive according to the following procedures and Figures 4-26.
1. Remove the two M2x3 white flat-head screws.
2. Remove the bracket.
Figure 4-26 Removing the bracket from the ODD drive

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures and Figures 4-26.
1. Secure the bracket with the two M2x3 white flat-head screws.
Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual
4 Replacement Procedures
4-39