Using The Grill - Gas; Ignition; Preheating - Belling Gas Range Service Manual

Caution: Accessible parts maybe hot when the
grill is used. Young children should be kept
away.

Ignition

Open the grill door. Push in and turn the
grill control knob anticlockwise to the
"full-on" position. Hold the control knob
in for 15 seconds and press the ignition
switch (if fitted), or hold a lighted match or
taper to the burner, until the burner lights.
Do not hold the control knob in for longer
than 15 seconds. If the burner fails to light
within this time, release the control knob
and wait for one minute before attempting
further ignition.
Important: Keep the grill door open when
the grill is on. To turn off, push in the
control knob and turn it clockwise to the
"off" position.
Detachable grill pan handle
grid
handle position
handle
indicators

USING THE GRILL - GAS

Place the handle over the edge of the grill
pan, at the narrow side edges. Slide the
handle to the centre, and locate between
the handle position indicators.
The handle should be removed from
the pan during grilling, to prevent
overheating.
The handle is designed for removing/
inserting the grill pan under the grill when
grilling.
If cleaning the grill pan when it is hot, use
oven gloves to move it. Do not use the
handle to pour hot fats from the grill pan.
Food for grilling should be positioned
centrally on the trivet.

Preheating

For best cooked results, always preheat
the grill for about 3 minutes.
grill pan