HOW TO PREPARE THE MACHINE FOR OPERATION
How To Install The Batteries
The 38, 33 and 28 Encore machines use six 6-volt or
three 12-volt batteries. The batteries are located in
the battery compartment under the recovery tank.
To Install the batteries, follow this procedure:
1. Turn key switch off.
2. Make sure both tanks are empty.
3. Disconnect the hoses from the recovery tank
(upper tank) & unplug the vac motor.
Remove the recovery tank.
4. Place the batteries in the solution tank as
shown in figures 8a - 8d.
WARNING:
Lifting batteries without
help could result in an
injury. Get help to lift the
batteries. The batteries are
heavy.
WARNING:
Working with batteries can
be dangerous. Always
wear eye protection and
protective clothing when
NO SMOKING!
5. Connect the battery cables between
batteries and install long battery cable
assembly as indicated. See figure 8a - 8d.
Figure #8d
Page
-14-
working near batteries.
38720B
CLARKE TECHNOLOGY Operator's Manual -Encore S28/L28/S33/L33/S38/L38
38722B
38722B
38720B
38722B
Figure #8a
38722B
38722B
38720B
38722B
Figure #8b
38722B
Figure #8c