Polycom SoundStation IP 7000 Setup Manual page 18

Setup Guide for the Polycom SoundStation IP 7000 Phone
Note
1 - 12
The following figure shows the 2.5mm audio connector on the side of the
conference phone. The 2.5mm audio connector has a mobile phone icon above
it.
To connect to audio from a mobile device:
Connect one end of the optional Mobile Device Cable to the headset jack
>>
on your mobile device, and connect the other end to the 2.5mm audio
connector on your conference phone.
If your conference phone setup has two connected phones, you can attach the
Mobile Device Cable to either conference phone.
For information on using your conference phone with a mobile device
connection, see the User Guide for the Polycom SoundStation IP 7000 Phone,
available from the SoundStation IP 7000
To connect to audio from a computer calling application:
Connect one end (the end with two connectors) of the Computer Calling
>>
Cable (contained in the optional Computer Calling Kit) to the sound card
on your computer, and connect the other end to the 2.5mm audio
connector on your phone.
For information on using your phone with a computer calling application, see
the User Guide for the Polycom SoundStation IP 7000 Phone, available from the
SoundStation IP 7000 Support Web page.
Support page.