Polycom SoundStation IP 7000 Setup Manual page 13

Console
Interconnect Cable
1
Warning
Before you connect two phones together, make sure you have the optional
Multi-Interface Module Package (containing a Multi-Interface Module, 3.6m
(12-ft) Network Cable (10-pin), Power Adapter, and Regional Power Cord)
and the optional Console Interconnect Cable.
The following figure shows how to connect two phones to the network using
AC power.
6
3.6m (12ft)
12-foot
Network Cable (10-pin)
To connect two phones to an AC power source:
Make sure you connect the two phones and the Multi-Interface Module before you
connect the Power Adapter (with the attached Regional Power Cord) to the wall
outlet.
1. Connect the 3.6m (12ft) Network Cable (10-pin) to the LAN jack on the
first phone.
2. Connect the other end of the 3.6m (12ft) Network Cable (10-pin) to the
Multi-Interface Module.
3. Connect the 7.6m (25ft) Network Cable to the Multi-Interface Module.
4. Connect the other end of the 7.6m (25ft) Network Cable to an available
LAN port on the wall or hub/switch device port.
5. Connect the Power Adapter to the Multi-Interface Module.
Power Adapter
7
5
2
7.6m (25ft)
25-foot
Network Cable
Setting Up Your Phone
Multi-Interface
Module
3
4
1 - 7