USING THE TELEPHONE
Receiving a Call
Lift the handset and speak
To end the call simply replace the handset in the cradle
Receiving a call – Hands Free
Press
To end the call press
Last Number Redial
Lift the handset and press
to redial the last number (up to 32 digits).
R Button on Private Branch Exchanges
If the telephone is connected to a private branch exchange, functions such
as transferring calls and automatic call back can be used via the R button.
Please refer to the operating manual supplied with your private branch
exchange to determine whether the telephone will work correctly with the
exchange.
Note: You can select the flash time 100/300ms by using the flash switch
on the rear of the unit.
Headset Use
A headset can be connected at the rear side of the base in the 2.5mm jack
.
Press
to get a dial tone.
Note: When using the headset the call is not amplified
to speak hands free
13
OPTIONAL ACCESSORIES
Shaker
At the back of the phone, there is a 3.5mm shaker jack marked
can connect an optional shaker device. When you are receiving an
incoming call, the shaker will vibrate.
. You
14
14