Receiving Volume And Tone Settings - Geemarc CL210A Instructions Manual

Telephone & answering machine
Hide thumbs Also See for CL210A:
Table of Contents

Advertisement

SETTINGS

Receiving Volume and Tone Settings

You can alter the receiving volume and tone during a conversation
according to your hearing requirements.
Use the Volume slide control on the front edge of the telephone base to
adjust the level.
The
button on the telephone base provides additional amplification
(a further 40dB). When the amplify function is activated, the red light on
the
key is lit.
Setting a default for Amplification.
ON/OFF
A switch
located at the rear allows the amplification facility
to be switched ON or OFF as a default each time you use the telephone.
ON/OFF Switch at ON Position
The additional amplification and tone controls are automatically activated
each time you use the telephone. The LED light next to the amplify button
will be lit.
Pressing the Amplify button during a call will turn off the additional
amplification and tone controls. However, you can still adjust the handset
receive volume with the Volume slide bar.
Irrespective of how many times you press the amplify key throughout a
call, the next time you pick up the handset to make a new call, these
functions will be activated once again.
9
SETTINGS
ON/OFF Switch at OFF Position
The additional amplification and tone controls are turned off each time you
use the telephone. The LED light next to the amplify button will be off.
Pressing the Amplify button once during a call will enable tone control and
additional amplification. The LED light next to the amplify button will turn
on to reflect this change. If you press the amplify button once more, the
additional amplification and tone control features will be turned off once
again. The LED light will turn off to reflect this change.
Irrespective of how many times you press the amplify key throughout a
call, the next time you pick up the handset, these functions will be turned
off once again.
Tone Receiving Adjustment
If the receiver volume has been amplified, the tone control can also be
adjusted. You can adjust and increase the low frequency or high
frequency sounds with the tone slide control on the front edge of the unit.
Note: The tone adjustment function will not be affective when the receiver
volume is set to normal level.
10
8 10
12

Advertisement

Table of Contents
loading

Table of Contents