4.6 Routing Configuration
The product supports RIP, RIP Version 2 as dynamic routing protocols. It supports static
routing as well.
4.6.1 Configuring dynamic routing
This section describes how to configure dynamic routing and dynamically register routing
information. Specify an interface on which dynamic routing is enabled, then enable dynamic
routing on the product.
1. Click on the [Network Connections] icon on the side bar.
2. Click on the
button for the interface for which you wish to enable dynamic routing.
3. In this section, [LAN Ethernet] is selected as an example. If you wish to select another
interface, choose the interface and follow the steps below.
Click
[Network Connections] page
Click on the
57
button