4.3 DHCP Server Configuration
The built-in DHCP server function automatically assigns a unique IP address to every PC or
networking device in the network as it is connected to the LAN.
192.168.1.11 is assigned
LAN Cable
192.168.1.12 is assigned
192.168.1.13 is assigned
The DHCP server function of the product can also be configured to always assign a static
IP address to a specific PC. Furthermore, both static IP assignment and dynamic IP
assignment can be configured simultaneously.
Caution:
- The DHCP server function of the product is enabled by default.
- If you do not wish to use the DHCP server function, manually assign an IP address to
each PC attached to your LAN.
- When IP is manually configured to each PC, its host name and IP address cannot be
managed by the product.
4.3.1 Basic configuration of DHCP server
This section describes the basic configuration of DHCP server settings.
LAN
Ex) LAN port IP address of the
product is 192.168.1.1 while
the first IP address to be
assigned
to
192.168.1.11
34
LAN
is
Internet