First Of All - Dukane 9137WU-RJ User Manual

Lcd data video projector
Hide thumbs Also See for 9137WU-RJ:
Table of Contents

Advertisement

First of all

Entries and graphical symbols explanation
The following entries and graphical symbols are used for the manuals and the product as
follows, for safety purpose. Please know their meanings beforehand, and heed them.
WARNING This entry warns of a risk of serious personal injury or even death.
CAUTION This entry warns of a risk of personal injury or physical damage.
NOTICE This entry notices of fear of causing trouble.
Important safety instruction
The followings are important instructions for safely using the product. Be sure to follow
them always when handling the product. The manufacturer assumes no responsibility for
any damage caused by mishandling that is beyond normal usage defined in these manuals
of this projector.
WARNING ► Never use the product in or after an abnormality (ex. giving off
smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an abnormality
should occur, unplug the projector urgently.
►Situate the product away from children and pets.
►Do not use the product when there is fear of a thunderbolt.
►Unplug the projector from the power outlet if the projector is not used for the time
being.
►Do not open or remove any portion of the product, unless the manuals direct it. For
internal maintenance, leave it to your dealer or their service personnel.
►Use only the accessories specified or recommended by the manufacturer.
►Modify neither the projector nor accessories.
►Let neither any things nor any liquids enter to the inside of the product.
►Do not wet the product.
►Do not place the projector where any oils, such as cooking or machine oil, are used.
Oil may harm the product, resulting in malfunction, or falling from the mounted position.
►Apply neither a shock nor pressure to this product.
- Do not place the product on an unstable place such as the uneven surface or the leaned
table.
- Do not place the product unstably. Place the projector so that it does not protrude from
the surface where the projector is placed on.
- Remove all the attachments including the power cord and cables, from the projector
when carrying the projector.
►Do not look into the lens and the openings on the projector, while the lamp is on.
►Do not approach the lamp cover and the exhaust vents, while the projection lamp is
on. Also after the lamp goes out, do not approach them for a while, since too hot.
2

Advertisement

Table of Contents
loading

Table of Contents