Standard Wall Plate Mounting - Qwest Q1960 Owner's Manual

QT1960_OM 4/6/01 5:27 PM Page 11

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.
1
2 - 7
1
Snap the wall mount
adapter into the notches
on the base.
2
Plug the telephone line
cord to the
TEL LINE jack and the
AC adapter to the
DC IN 9V jack.
3
Plug the telephone line
cord into the telephone
outlet.
4
Wrap the AC adapter
cord inside the molded
wiring channel. Then
wrap the cord around
the strain relief notch.
5
Plug the AC adapter into
a standard
120V AC wall outlet.
6
Raise the antenna to a
vertical position.
7
Align the mounting slots
on the base. with the
mounting posts on the
wall. Push in and down
until the phone is firmly
seated.
7